Product Features The CURRIStain door provides the qualities of a steel door with a textured factory stained finish to simulate real wood.  Doors are available with the following features: 707 series (Polystyrene or Polyurethane Core) or 727 series (Temperature Rise Core) in singles or pairs. Doors are 1-3/4 inch thick with 20 gauge or 18 gauge galvanized steel face sheets wood grain embossed .005 inch deep. Edges of door are available with the ‘S’ visible seam edge only with beveled or square lock edge. Maximum door size is 4'0" x 8'0". Doors may be fire rated to 3 hours following typical fire rated door restrictions based on series, gauge, and size. Window preparations are available in all CURRIES standard face types. Astragals for pairs of doors are available screw applied to the door edge. Astragals are stain color matched to the door.
Specifications Stainable wood grained steel doors shall be as manufactured by CURRIES, Mason City, Iowa. Doors shall be 707 series construction with continuous hinge and lock channel construction the full height of the door. Hinge and lock mounting preparations are integrally formed into these channels. Inverted top and bottom channel construction provides a full perimeter channel door infrastructure with door face skins supported by either polystyrene core or polyurethane core permanently bond to the face skins as required for insulating values on all openings. Doors shall be manufactured of 20 gauge or 18 gauge galvanneal steel for corrosion resistance. Door face skins are grained .005"deep to accent the color stain application requested by the building owner. Doors are available handed as single doors or pairs of doors with or without fire resistance ratings. Doors are factory stained and sealed with the owner’s choice of CURRIES standard colors. NOTE: The 727 series temperature rise door specification may also be used here. Primer Factory prime paint is a two component urethane tinted beige to enhance staining and shall comply with SDI Industry prime paint standard ANSI A250.10. Stain Stains used are solvent based products. Uniform application of stain by spraying 1 mil thickness over the entire door surface area and removing the excess stain by brushing or wiping the surface to obtain the desired color and effect. Six color choices are available (natural, wheat, cashew, cocoa, cabernet, or java). Topcoat A Urethane with UV inhibitors topcoat is spray applied evenly across the surfaces. This UV-resistant topcoat provides excellent resistance to normal wear and abuse. This topcoat is proven to be reliable for exterior as well as interior installations. This finish coat has been tested in conformance with ANSI Standard A250.3-1999. Warranty CURRIES steel doors have a warranty for one year on materials and craftsmanship after delivery to the jobsite. CURRIStain factory finish products include this one year warranty. Incidental nicks and scratches may be repaired using touch up “pens” available from the CURRIES factory. NOTE: Substitute door series 727 for 707 when temperature rise listed openings are required. 727 doors use a “temperature rise core” in lieu of the polystyrene or polyurethane core.

Architectural Products of Virginia • 10223 Sycamore Drive • Ashland, Virginia 23005
Phone (804) 550-2822 • Fax (804) 550-2826
Copyright © 2005 Architectural Products of Virginia. All rights reserved.